CCNA Routing and Switching
100-105 Interconnecting Cisco Networking Devices Part 1
CCENT: Access Control Lists Part 1
CCENT: Access Control Lists Part 2
CCENT: Device Hardening
CCENT: Device Management
CCENT: DHCP Configuration
CCENT: Discovering Ethernet
CCENT: Discovery Protocols
CCENT: DNS Configuration
CCENT: Functions of Routing
CCENT: Initial Device Configuration
CCENT: Inter VLAN Routing
CCENT: Interswitch Connectivity
CCENT: IPv4 Addressing Part 1
CCENT: IPv4 Addressing Part 2
CCENT: IPv4 Configuration
CCENT: IPv6 Addressing
CCENT: IPv6 Configuration
CCENT: NAT Configuration
CCENT: Network Cabling
CCENT: Network Components, Topologies, and Architecture
CCENT: NTP Configuration
CCENT: OSI Model
CCENT: Overview of Cisco Devices
CCENT: Overview of Networking
CCENT: Port Security
CCENT: RIPv2 Configuration
CCENT: Static Routing
CCENT: Subnetting Part 1
CCENT: Subnetting Part 2
CCENT: Subnetting Practice
CCENT: Switching Functions
CCENT: TCP/IP Model
CCENT: Troubleshooting Interfaces and Cables
CCENT: Troubleshooting Methodologies
CCENT: VLAN Configuration
Mentoring 100-105 Interconnecting Cisco Networking Devices Part 1 (ICND1)
TestPrep 100-105 Interconnecting Cisco Networking Devices Part 1 (ICND1)
200-105 Interconnecting Cisco Networking Devices Part 2
ICND2 3.0: Configuring ACLs
ICND2 3.0: Configuring and Verifying EIGRP
ICND2 3.0: Configuring and Verifying OSPFv3
ICND2 3.0: Configuring EtherChannel
ICND2 3.0: Configuring Multiarea OSPFv2
ICND2 3.0: Configuring OSPFv2
ICND2 3.0: Configuring Trunking
ICND2 3.0: Device Monitoring, Management, and Programmability
ICND2 3.0: Implementing EIGRP
ICND2 3.0: Implementing VLANs
ICND2 3.0: Infrastructure Services
ICND2 3.0: InterVLAN Routing
ICND2 3.0: OSPFv2 Operations
ICND2 3.0: PortFast and BPDU guard
ICND2 3.0: QoS Overview
ICND2 3.0: Routing Protocols
ICND2 3.0: SNMP Monitoring
ICND2 3.0: Spanning Tree Configuration and Verification
ICND2 3.0: Spanning Tree Overview
ICND2 3.0: Troubleshooting Connectivity
ICND2 3.0: Trunking Overview
ICND2 3.0: WAN Topologies and Connectivity
ICND2 3.0: Wide Area Networks Using GRE and eBGP
ICND2 3.0: Wide Area Networks Using PPP
ICND2 3.0:Switch Aggregation and Threat Mitigation
Mentoring 200-105 Interconnecting Cisco Networking Devices Part 2 (ICND2)
TestPrep 200-105 Interconnecting Cisco Networking Devices Part 2 (ICND2)
200-125 Interconnecting Cisco Networking Devices
CCENT: Access Control Lists Part 1
CCENT: Access Control Lists Part 2
CCENT: Device Hardening
CCENT: Device Management
CCENT: DHCP Configuration
CCENT: Discovering Ethernet
CCENT: Discovery Protocols
CCENT: DNS Configuration
CCENT: Functions of Routing
CCENT: Initial Device Configuration
CCENT: Inter VLAN Routing
CCENT: Interswitch Connectivity
CCENT: IPv4 Addressing Part 1
CCENT: IPv4 Addressing Part 2
CCENT: IPv4 Configuration
CCENT: IPv6 Addressing
CCENT: IPv6 Configuration
CCENT: NAT Configuration
CCENT: Network Cabling
CCENT: Network Components, Topologies, and Architecture
CCENT: NTP Configuration
CCENT: OSI Model
CCENT: Overview of Cisco Devices
CCENT: Overview of Networking
CCENT: Port Security
CCENT: RIPv2 Configuration
CCENT: Static Routing
CCENT: Subnetting Part 1
CCENT: Subnetting Part 2
CCENT: Subnetting Practice
CCENT: Switching Functions
CCENT: TCP/IP Model
CCENT: Troubleshooting Interfaces and Cables
CCENT: Troubleshooting Methodologies
CCENT: VLAN Configuration
ICND2 3.0: Configuring ACLs
ICND2 3.0: Configuring and Verifying EIGRP
ICND2 3.0: Configuring and Verifying OSPFv3
ICND2 3.0: Configuring EtherChannel
ICND2 3.0: Configuring Multiarea OSPFv2
ICND2 3.0: Configuring OSPFv2
ICND2 3.0: Configuring Trunking
ICND2 3.0: Device Monitoring, Management, and Programmability
ICND2 3.0: Implementing EIGRP
ICND2 3.0: Implementing VLANs
ICND2 3.0: Infrastructure Services
ICND2 3.0: InterVLAN Routing
ICND2 3.0: OSPFv2 Operations
ICND2 3.0: PortFast and BPDU guard
ICND2 3.0: QoS Overview
ICND2 3.0: Routing Protocols
ICND2 3.0: SNMP Monitoring
ICND2 3.0: Spanning Tree Configuration and Verification
ICND2 3.0: Spanning Tree Overview
ICND2 3.0: Troubleshooting Connectivity
ICND2 3.0: Trunking Overview
ICND2 3.0: WAN Topologies and Connectivity
ICND2 3.0: Wide Area Networks Using GRE and eBGP
ICND2 3.0: Wide Area Networks Using PPP
ICND2 3.0:Switch Aggregation and Threat Mitigation
Mentoring 200-125 Interconnecting Cisco Networking Devices (CCNA)
TestPrep 200-125 CCNA Routing and Switching

CCENT: Access Control Lists Part 1

Course Number:
it_ccenttv_30_enus
Lesson Objectives

CCENT: Access Control Lists Part 1

  • describe the configuration and operation of Standard Access Control Lists
  • apply standard ACLs to an interface and describe how extended ACLs can be created

Overview/Description

Securing the network, especially at the perimeter, is a critical part of network administration. Discover how to use Access Control Lists to permit or deny access to network resources.



Target

Prerequisites: none

CCENT: Access Control Lists Part 2

Course Number:
it_ccenttv_31_enus
Lesson Objectives

CCENT: Access Control Lists Part 2

  • describe additional ACLs that may need to be configured
  • use and apply named access lists on a virtual interface

Overview/Description

Securing the network, especially at the perimeter, is a critical part of network administration. Discover how to use Access Control Lists to permit or deny access to network resources.



Target

Prerequisites: none

CCENT: Device Hardening

Course Number:
it_ccenttv_34_enus
Lesson Objectives

CCENT: Device Hardening

  • do the initial setup and basic configuration of a router
  • apply device configuration, configure routing protocols, and configure remote access options
  • perform image and password recovery as well as do file system management

Overview/Description

From initial configuration to hardening, all devices require periodic maintenance, recovery, or security hardening. Explore the basics of hardening and maintaining a router.



Target

Prerequisites: none

CCENT: Device Management

Course Number:
it_ccenttv_33_enus
Lesson Objectives

CCENT: Device Management

  • configure and use a syslog server to store router logs; and, configure a router to send messages to a syslog server
  • backup a routers configuration using tftp

Overview/Description

From initial configuration to hardening, all devices require periodic maintenance, recovery, or security hardening. Explore the basics of hardening and maintaining a router.



Target

Prerequisites: none

CCENT: DHCP Configuration

Course Number:
it_ccenttv_28_enus
Objectives:

Overview/Description

DHCP can be used to replace static client IP and network configuration on clients where a static IP is not required. Explore DHCP, how to configure a router to provide the service, and how to configure clients.



Target

Prerequisites: none

CCENT: Discovering Ethernet

Course Number:
it_ccenttv_17_enus
Objectives:

Overview/Description

Ethernet data packets rely on a payload called frames to define how bits are transmitted and received over a network. Explore the Ethernet frame header and the information it provides.



Target

Prerequisites: none

CCENT: Discovery Protocols

Course Number:
it_ccenttv_21_enus
Objectives:

Overview/Description

Managing network devices involves many protocols. Explore technologies used in the management and discovery of network devices.



Target

Prerequisites: none

CCENT: DNS Configuration

Course Number:
it_ccenttv_27_enus
Lesson Objectives

CCENT: DNS Configuration

  • describe the DNS lookup process and how DNS can be configured on individual devices
  • configure a router to provide DNS services and how to manage a hosts table

Overview/Description

DNS is critical to the internet and required for finding websites or even individual devices or servers. Explore DNS, how it works, and how to configure both a server and client device.



Target

Prerequisites: none

CCENT: Functions of Routing

Course Number:
it_ccenttv_23_enus
Lesson Objectives

CCENT: Functions of Routing

  • explain how a packet uses the Layer 2 and Layer 3 protocols in networking
  • identify routing table components, routing protocol administrative distances, and describe the use of static versus dynamic routing
  • discuss components of the routing table and configure dynamic routing

Overview/Description

Routers allow network devices to communicate beyond their local area network (LAN), providing inter-network connectivity. Explore routing, including components, functionality, the routing table, routing protocols, and path selection.



Target

Prerequisites: none

CCENT: Initial Device Configuration

Course Number:
it_ccenttv_11_enus
Objectives:

Overview/Description

When installing new Cisco devices on a network, they need to be configured to work properly. Explore initial switch and router configuration.



Target

Prerequisites: none

CCENT: InterVLAN Routing

Course Number:
it_ccenttv_24_enus
Objectives:

Overview/Description

VLANs on a single switch cannot directly communicate without a router. Discover how to configure a Layer 3 device to allow traffic to traverse multiple VLANs.



Target

Prerequisites: none

CCENT: Interswitch Connectivity

Course Number:
it_ccenttv_20_enus
Objectives:

Overview/Description

A switch's port can either function as a regular access port or it can be used as a trunk port and used to connect to another switch. Discover how these port types and trunks are configured, and how VLAN traffic is impacted.



Target

Prerequisites: none

CCENT: IPv4 Addressing Part 1

Course Number:
it_ccenttv_06_enus
Objectives:

Overview/Description

Each device belonging to a network is assigned a unique IP address by which it can be identified. Explore IPv4 addressing, including its limitations.



Target

Prerequisites: none

CCENT: IPv4 Addressing Part 2

Course Number:
it_ccenttv_07_enus
Objectives:

Overview/Description

Each device belonging to a network is assigned a unique IP address by which it can be identified. Explore IPv4 addressing, including its limitations.



Target

Prerequisites: none

CCENT: IPv4 Configuration

Course Number:
it_ccenttv_12_enus
Objectives:

Overview/Description

Explore the different configuration options that are part of IPv4 addressing and explore some basic troubleshooting techniques.



Target

Prerequisites: none

CCENT: IPv6 Addressing

Course Number:
it_ccenttv_10_enus
Objectives:

Overview/Description

IPv6 overcomes the limitations of IPv4 by providing more than enough globally unique IP addresses to accommodate every device in the world. Explore IPv6 features, address types, and allocation.



Target

Prerequisites: none

CCENT: IPv6 Configuration

Course Number:
it_ccenttv_13_enus
Objectives:

Overview/Description

Explore IPv6 address configuration including enabling unicast routing, manually assigning IPv6 addresses, and ways to verify the interface.



Target

Prerequisites: none

CCENT: NAT Configuration

Course Number:
it_ccenttv_32_enus
Lesson Objectives

CCENT: NAT Configuration

  • describe the different types of NAT and configure static NAT
  • None
  • configure and use PAT, or NAT overload, using an access-list

Overview/Description

Network address translation is a process for allowing client systems to access the internet without their own dedicated routable IP. Discover how to configure and use NAT.



Target

Prerequisites: none

CCENT: Network Cabling

Course Number:
it_ccenttv_05_enus
Objectives:

Overview/Description

Explore the different networking cables, such as fiber and copper cables, technicians may encounter while working.



Target

Prerequisites: none

CCENT: Network Components, Topologies, and Architecture

Course Number:
it_ccenttv_04_enus
Objectives:

Overview/Description

Discover the key network components that you'll find within a network, the common design strategies for topologies, and the key network architecture basics required to configure a functional Enterprise internetwork.



Target

Prerequisites: none

CCENT: NTP Configuration

Course Number:
it_ccenttv_29_enus
Objectives:

Overview/Description

Synchronizing time between systems is important for meeting many legal obligations. The Network Time Protocol was designed to do this. Discover how to configure an NTP server and configure clients to use the service.



Target

Prerequisites: none

CCENT: OSI Model

Course Number:
it_ccenttv_02_enus
Objectives:

Overview/Description

The Open System Interconnection (OSI) model divides network communication into seven layers. Explore the seven layers of the OSI model.



Target

Prerequisites: none

CCENT: Overview of Cisco Devices

Course Number:
it_ccenttv_15_enus
Objectives:

Overview/Description

Explore the physical components of Cisco devices - the internal integrated parts provided in some devices, versus the interchangeable options included for others, allowing the addition of further functionality.



Target

Prerequisites: none

CCENT: Overview of Networking

Course Number:
it_ccenttv_01_enus
Objectives:

Overview/Description

Networks are the basic interconnections for all computing devices. Explore network fundamentals.

 



Target

Prerequisites: none

CCENT: Port Security

Course Number:
it_ccenttv_22_enus
Lesson Objectives

CCENT: Port Security

  • describe port-security violation modes and the need for configuring "switchport port-security"
  • configure port security and demonstrate recovery from a violation

Overview/Description

Explore port-security concepts, such as the different violation modes, the need for "switchport port-security", and how to configure a recovery from a violation.



Target

Prerequisites: none

CCENT: RIPv2 Configuration

Course Number:
it_ccenttv_26_enus
Lesson Objectives

CCENT: RIPv2 Configuration

  • configure dynamic routing protocols using RIP v2 for IPv4 by building a routing table
  • configure RIPv2 passive interfaces, loops, and changes to the network topography
  • tuning RIPV2 timing parameters and options

Overview/Description

Although static routing can work for a smaller network, ultimately, dynamic routing is the way to handle routing. Explore dynamic routing using the RIPv2 protocol over IPv4.



Target

Prerequisites: none

CCENT: Static Routing

Course Number:
it_ccenttv_25_enus
Objectives:

Overview/Description

Routing allows data to be transmitted across networks from source to destination. Optimal routes can be determined by using dynamic routing protocols or by static configuration. Explore the implementation of static routes.



Target

Prerequisites: none

CCENT: Subnetting Part 1

Course Number:
it_ccenttv_08_enus
Objectives:

Overview/Description

Subnetting has several benefits, including achieving more efficient use of address space, increasing security through segmentation, and decreasing the size of collision and broadcast domains. Explore how to easily subnet networks.



Target

Prerequisites: none

CCENT: Subnetting Part 2

Course Number:
it_ccenttv_09_enus
Objectives:

Overview/Description

Subnetting has several benefits, including achieving more efficient use of address space, increasing security through segmentation, and decreasing the size of collision and broadcast domains. Explore how to easily subnet networks.



Target

Prerequisites: none

CCENT: Subnetting Practice

Course Number:
it_ccenttv_35_enus
Lesson Objectives

CCENT: Subnetting Practice

  • recognize and work with subnetting problems
  • apply subnetting to example problems

Overview/Description

Work through the logic of tackling exam questions about subnetting.



Target

Prerequisites: none

CCENT: Switching Functions

Course Number:
it_ccenttv_16_enus
Objectives:

Overview/Description

Discover fundamental concepts like broadcast and collision domains, the difference between hubs and switches, and how MAC address tables are populated as data moves through the switch device.



Target

Prerequisites: none

CCENT: TCP/IP Model

Course Number:
it_ccenttv_03_enus
Objectives:

Overview/Description

Discover the TCP/IP networking model, which is used in the majority of LAN networks and on the Internet, and explore the two foundational transport layer protocols - TCP and UDP.



Target

Prerequisites: none

CCENT: Troubleshooting Interfaces and Cables

Course Number:
it_ccenttv_18_enus
Objectives:

Overview/Description

Cabling-related settings need to be configured properly in order to ensure device connectivity and interface stability. Explore the configuration and troubleshooting of speed, duplex, MDIX, and auto interface settings.



Target

Prerequisites: none

CCENT: Troubleshooting Methodologies

Course Number:
it_ccenttv_14_enus
Objectives:

Overview/Description

Troubleshooting methodologies provide a variety of approaches. Explore how to determine which techniques are best suited for your configuration scenario.



Target

Prerequisites: none

CCENT: VLAN Configuration

Course Number:
it_ccenttv_19_enus
Objectives:

Overview/Description

VLANs are logically separated broadcast domains created through switching technology that provide a means of creating network security zones. Explore network design and how VLANs are used to enhance network operations.



Target

Prerequisites: none

Mentoring 100-105 Interconnecting Cisco Networking Devices Part 1 (ICND1)

Lesson Objectives

Mentoring 100-105 Interconnecting Cisco Networking Devices Part 1 (ICND1)

  • Network Fundamentals
  • LAN Switching Fundamentals
  • Routing Fundamentals
  • Infrastructure Services
  • Infrastructure Maintenance

Overview/Description
Skillsoft Mentors are available to help students with their studies for exam 100-105 Interconnecting Cisco Networking Devices Part 1 (ICND1). You can reach them by entering a Mentored Chat Room or by using the Email My Mentor service.

Target Audience
Individuals who are studying the associated Skillsoft content in preparation for, or to become familiar with, the skills and competencies being measured by the actual certification exam.

TestPrep 100-105 Interconnecting Cisco Networking Devices Part 1 (ICND1)

Course Number:
cc_icnd_a01_tp_enus
Lesson Objectives

TestPrep 100-105 Interconnecting Cisco Networking Devices Part 1 (ICND1)

  • >

Overview/Description
To test your knowledge on the skills and competencies being measured by the vendor certification exam. TestPrep can be taken in either Study or Certification mode. Study mode is designed to maximize learning by not only testing your knowledge of the material, but also by providing additional information on the topics presented. Certification mode is designed to test your knowledge of the material within a structured testing environment, providing valuable feedback at the end of the test.

Target Audience
Individuals seeking practice in a structured testing environment, covering the skills and competencies being measured by the vendor certification exam.

Prerequisites: none

ICND2 3.0: Configuring ACLs

Course Number:
it_ccnarstv_22_enus
Objectives:

Overview/Description

An access control list (ACL) is a programmed statement used to permit or deny network traffic based on specified criteria. Explore ACL types, how they operate, and their configuration.



Target

Prerequisites: none

ICND2 3.0: Configuring and Verifying EIGRP

Course Number:
it_ccnarstv_16_enus
Lesson Objectives

ICND2 3.0: Configuring and Verifying EIGRP

  • configure 3 routers to use EIGRP to adverstise routes
  • identify the variance command, auto-summmary and manipulate the bandwidth on interfaces to change what gets into the routing table for EIGRP
  • configure, verify, and troubleshoot EIGRP for IPv6

Overview/Description

Building scalable routed networks requires dynamic routing protocols like EIGRP. Learn how to configure and modify EIGRP, as well as how to verify your configurations.



Target

Prerequisites: none

ICND2 3.0: Configuring and Verifying OSPFv3

Course Number:
it_ccnarstv_14_enus
Objectives:

Overview/Description

OSPFv3 is a link-state routing protocol that expands on the functionality of OSPFv2, including support for IPv6. Explore the OSPFv3 routing protocol, including how to configure it and verify the configuration.



Target

Prerequisites: none

ICND2 3.0: Configuring EtherChannel

Course Number:
it_ccnarstv_07_enus
Objectives:

Overview/Description

Discover the benefits of EtherChannel and learn how to configure it.



Target

Prerequisites: none

ICND2 3.0: Configuring Multiarea OSPFv2

Course Number:
it_ccnarstv_13_enus
Objectives:

Overview/Description

Discover how to configure multiarea OSPFv2 and explore the differences between single-area and multiarea OSPFv2.



Target

Prerequisites: none

ICND2 3.0: Configuring OSPFv2

Course Number:
it_ccnarstv_12_enus
Objectives:

Overview/Description

OSPF is a highly flexible and versatile routing protocol. Examine the configuration and verification of an OSPFv2 deployment.



Target

Prerequisites: none

ICND2 3.0: Configuring Trunking

Course Number:
it_ccnarstv_03_enus
Objectives:

Overview/Description

Explore the concept of trunking and the tasks required to configure and verify them.



Target

Prerequisites: none

ICND2 3.0: Device Monitoring, Management, and Programmability

Course Number:
it_ccnarstv_24_enus
Lesson Objectives

ICND2 3.0: Device Monitoring, Management, and Programmability

  • describe the use of AAA for device management and the differences between TACACS+ and RADIUS
  • describe how networking devices function with the control and data planes

Overview/Description

Networks are continually evolving, which is something that you need to embrace. This will help you implement the most secure, scalable, highly-available, and cost efficient networks. Explore device management tools.



Target

Prerequisites: none

ICND2 3.0: Implementing EIGRP

Course Number:
it_ccnarstv_15_enus
Objectives:

Overview/Description

Enhanced Interior Gateway Routing Protocol (EIGRP) is an advanced distance-vector routing protocol developed by Cisco. Learn about its features, feasible and reported distances, and how it calculates metrics.



Target

Prerequisites: none

ICND2 3.0: Implementing VLANs

Course Number:
it_ccnarstv_01_enus
Objectives:

Overview/Description

VLANs provide several benefits, including providing flexible design that's not defined by physical location and the ability to segment broadcast domains to reduce overhead and increase security. Examine how to configure VLANs.



Target

Prerequisites: none

ICND2 3.0: Infrastructure Services

Course Number:
it_ccnarstv_20_enus
Lesson Objectives

ICND2 3.0: Infrastructure Services

  • describe HSRP and why it is used
  • describe how to access cloud resources and the different types of virtual services available

Overview/Description

Examine how HSRP and cloud computing can greatly enhance networks.



Target

Prerequisites: none

ICND2 3.0: InterVLAN Routing

Course Number:
it_ccnarstv_09_enus
Objectives:

Overview/Description

Discover the need for InterVLAN routing in modern day network deployments and explore the concepts and configuration of InterVLAN routing.



Target

Prerequisites: none

ICND2 3.0: OSPFv2 Operations

Course Number:
it_ccnarstv_11_enus
Objectives:

Overview/Description

Explore the characteristics and behaviors of OSPFv2 and how it can be used to build large scale routing domains.



Target

Prerequisites: none

ICND2 3.0: PortFast and BPDU guard

Course Number:
it_ccnarstv_06_enus
Objectives:

Overview/Description

PortFast and Bridge Protocol Data Unit (BPDU) guard are Spanning Tree Protocol (STP) enhancements that improves network reliability, manageability, and security. Discover how to configure PortFast and BPDU guard.



Target

Prerequisites: none

ICND2 3.0: QoS Overview

Course Number:
it_ccnarstv_21_enus
Lesson Objectives

ICND2 3.0: QoS Overview

  • describe basic QoS concepts

  • Overview/Description

    Explore the need for QoS, and the various features, tools, and mechanisms that it offers.



    Target

    Prerequisites: none

    ICND2 3.0: Routing Protocols

    Course Number:
    it_ccnarstv_10_enus
    Objectives:

    Overview/Description

    Explore the characteristics and behaviors of different interior gateway protocols so you will be able to identify which one aligns best to your needs.



    Target

    Prerequisites: none

    ICND2 3.0: SNMP Monitoring

    Course Number:
    it_ccnarstv_23_enus
    Objectives:

    Overview/Description

    Explore SNMP, a standard protocol for managing and monitoring network devices.



    Target

    Prerequisites: none

    ICND2 3.0: Spanning Tree Configuration and Verification

    Course Number:
    it_ccnarstv_05_enus
    Objectives:

    Overview/Description

    Spanning Tree Protocol (STP) identifies and terminates redundant links to provide a loop-free network. Examine STP configuration.



    Target

    Prerequisites: none

    ICND2 3.0: Spanning Tree Overview

    Course Number:
    it_ccnarstv_04_enus
    Objectives:

    Overview/Description

    Spanning Tree Protocol (STP) identifies and terminates redundant links to provide a loop-free network. Explore STP operations.



    Target

    Prerequisites: none

    ICND2 3.0: Troubleshooting Connectivity

    Course Number:
    it_ccnarstv_25_enus
    Lesson Objectives

    ICND2 3.0: Troubleshooting Connectivity

    • describe Echo-based IP SLAs and why they are used
    • describe the simple configuration of local SPAN
    • describe the basic tools used to troubleshoot end-to-end connectivity

    Overview/Description

    As a network administrator, it's vital to be able to troubleshoot network connectivity issues. Learn how to troubleshoot with SPAN, IP SLA, and other tools.



    Target

    Prerequisites: none

    ICND2 3.0: Trunking Overview

    Course Number:
    it_ccnarstv_02_enus
    Objectives:

    Overview/Description

    Trunk links provide VLAN identification for frames traveling between switches. Explore the concept of trunking.



    Target

    Prerequisites: none

    ICND2 3.0: WAN Topologies and Connectivity

    Course Number:
    it_ccnarstv_19_enus
    Objectives:

    Overview/Description

    Today's networks span across the globe. To connect different geographical locations, you need to implement a wide area network. Build your foundational knowledge of WANs by learning about topologies, connectivity options, VPNs, and devices.



    Target

    Prerequisites: none

    ICND2 3.0: Wide Area Networks Using GRE and eBGP

    Course Number:
    it_ccnarstv_18_enus
    Lesson Objectives

    ICND2 3.0: Wide Area Networks Using GRE and eBGP

    • configure the GRE tunnel and verify that it works
    • describe the basics of IGP vs EGP for configuring single-homed eBGP

    Overview/Description

    A WAN is a network that spans large geographical areas and interconnects smaller networks, such as LANs. Increase your knowledge of connecting global networks by learning about GRE tunnels, inter-domain routing, and eBGP.



    Target

    Prerequisites: none

    ICND2 3.0: Wide Area Networks Using PPP

    Course Number:
    it_ccnarstv_17_enus
    Lesson Objectives

    ICND2 3.0: Wide Area Networks Using PPP

    • describe the use of PPP over serial links
    • configure load balancing by using multilink PPP configuration
    • describe the basic concept of using PPPoE and demonstrate both the server-side and client-side configurations

    Overview/Description

    WANs connect global networks and choosing the correct type depends on your needs. Learn about PPP, MLP, and PPPoE so you have the knowledge you need to research, deploy, manage, and maintain WANs.



    Target

    Prerequisites: none

    ICND2 3.0: Switch Aggregation and Threat Mitigation

    Course Number:
    it_ccnarstv_08_enus
    Objectives:

    Overview/Description

    Being able to meet your network's demands is essential in managing secure and highly available networks. Explore switch aggregation and threat mitigation.



    Target

    Prerequisites: none

    Mentoring 200-105 Interconnecting Cisco Networking Devices Part 2 (ICND2)

    Lesson Objectives

    Mentoring 200-105 Interconnecting Cisco Networking Devices Part 2 (ICND2)

    • LAN Switching Technologies
    • Routing Technologies
    • WAN Technologies
    • Infrastructure Services
    • Infrastructure Maintenance

    Overview/Description
    Skillsoft Mentors are available to help students with their studies for exam 200-105 Interconnecting Cisco Networking Devices Part 2 (ICND2). You can reach them by entering a Mentored Chat Room or by using the Email My Mentor service.

    Target Audience
    Individuals who are studying the associated Skillsoft content in preparation for, or to become familiar with, the skills and competencies being measured by the actual certification exam.

    TestPrep 200-105 Interconnecting Cisco Networking Devices Part 2 (ICND2)

    Course Number:
    cc_icng_a01_tp_enus
    Lesson Objectives

    TestPrep 200-105 Interconnecting Cisco Networking Devices Part 2 (ICND2)

    • >

    Overview/Description
    To test your knowledge on the skills and competencies being measured by the vendor certification exam. TestPrep can be taken in either Study or Certification mode. Study mode is designed to maximize learning by not only testing your knowledge of the material, but also by providing additional information on the topics presented. Certification mode is designed to test your knowledge of the material within a structured testing environment, providing valuable feedback at the end of the test.

    Target Audience
    Individuals seeking practice in a structured testing environment, covering the skills and competencies being measured by the vendor certification exam.

    Prerequisites: none

    CCENT: Access Control Lists Part 1

    Course Number:
    it_ccenttv_30_enus
    Lesson Objectives

    CCENT: Access Control Lists Part 1

    • describe the configuration and operation of Standard Access Control Lists
    • apply standard ACLs to an interface and describe how extended ACLs can be created

    Overview/Description

    Securing the network, especially at the perimeter, is a critical part of network administration. Discover how to use Access Control Lists to permit or deny access to network resources.



    Target

    Prerequisites: none

    CCENT: Access Control Lists Part 2

    Course Number:
    it_ccenttv_31_enus
    Lesson Objectives

    CCENT: Access Control Lists Part 2

    • describe additional ACLs that may need to be configured
    • use and apply named access lists on a virtual interface

    Overview/Description

    Securing the network, especially at the perimeter, is a critical part of network administration. Discover how to use Access Control Lists to permit or deny access to network resources.



    Target

    Prerequisites: none

    CCENT: Device Hardening

    Course Number:
    it_ccenttv_34_enus
    Lesson Objectives

    CCENT: Device Hardening

    • do the initial setup and basic configuration of a router
    • apply device configuration, configure routing protocols, and configure remote access options
    • perform image and password recovery as well as do file system management

    Overview/Description

    From initial configuration to hardening, all devices require periodic maintenance, recovery, or security hardening. Explore the basics of hardening and maintaining a router.



    Target

    Prerequisites: none

    CCENT: Device Management

    Course Number:
    it_ccenttv_33_enus
    Lesson Objectives

    CCENT: Device Management

    • configure and use a syslog server to store router logs; and, configure a router to send messages to a syslog server
    • backup a routers configuration using tftp

    Overview/Description

    From initial configuration to hardening, all devices require periodic maintenance, recovery, or security hardening. Explore the basics of hardening and maintaining a router.



    Target

    Prerequisites: none

    CCENT: DHCP Configuration

    Course Number:
    it_ccenttv_28_enus
    Objectives:

    Overview/Description

    DHCP can be used to replace static client IP and network configuration on clients where a static IP is not required. Explore DHCP, how to configure a router to provide the service, and how to configure clients.



    Target

    Prerequisites: none

    CCENT: Discovering Ethernet

    Course Number:
    it_ccenttv_17_enus
    Objectives:

    Overview/Description

    Ethernet data packets rely on a payload called frames to define how bits are transmitted and received over a network. Explore the Ethernet frame header and the information it provides.



    Target

    Prerequisites: none

    CCENT: Discovery Protocols

    Course Number:
    it_ccenttv_21_enus
    Objectives:

    Overview/Description

    Managing network devices involves many protocols. Explore technologies used in the management and discovery of network devices.



    Target

    Prerequisites: none

    CCENT: DNS Configuration

    Course Number:
    it_ccenttv_27_enus
    Lesson Objectives

    CCENT: DNS Configuration

    • describe the DNS lookup process and how DNS can be configured on individual devices
    • configure a router to provide DNS services and how to manage a hosts table

    Overview/Description

    DNS is critical to the internet and required for finding websites or even individual devices or servers. Explore DNS, how it works, and how to configure both a server and client device.



    Target

    Prerequisites: none

    CCENT: Functions of Routing

    Course Number:
    it_ccenttv_23_enus
    Lesson Objectives

    CCENT: Functions of Routing

    • explain how a packet uses the Layer 2 and Layer 3 protocols in networking
    • identify routing table components, routing protocol administrative distances, and describe the use of static versus dynamic routing
    • discuss components of the routing table and configure dynamic routing

    Overview/Description

    Routers allow network devices to communicate beyond their local area network (LAN), providing inter-network connectivity. Explore routing, including components, functionality, the routing table, routing protocols, and path selection.



    Target

    Prerequisites: none

    CCENT: Initial Device Configuration

    Course Number:
    it_ccenttv_11_enus
    Objectives:

    Overview/Description

    When installing new Cisco devices on a network, they need to be configured to work properly. Explore initial switch and router configuration.



    Target

    Prerequisites: none

    CCENT: InterVLAN Routing

    Course Number:
    it_ccenttv_24_enus
    Objectives:

    Overview/Description

    VLANs on a single switch cannot directly communicate without a router. Discover how to configure a Layer 3 device to allow traffic to traverse multiple VLANs.



    Target

    Prerequisites: none

    CCENT: Interswitch Connectivity

    Course Number:
    it_ccenttv_20_enus
    Objectives:

    Overview/Description

    A switch's port can either function as a regular access port or it can be used as a trunk port and used to connect to another switch. Discover how these port types and trunks are configured, and how VLAN traffic is impacted.



    Target

    Prerequisites: none

    CCENT: IPv4 Addressing Part 1

    Course Number:
    it_ccenttv_06_enus
    Objectives:

    Overview/Description

    Each device belonging to a network is assigned a unique IP address by which it can be identified. Explore IPv4 addressing, including its limitations.



    Target

    Prerequisites: none

    CCENT: IPv4 Addressing Part 2

    Course Number:
    it_ccenttv_07_enus
    Objectives:

    Overview/Description

    Each device belonging to a network is assigned a unique IP address by which it can be identified. Explore IPv4 addressing, including its limitations.



    Target

    Prerequisites: none

    CCENT: IPv4 Configuration

    Course Number:
    it_ccenttv_12_enus
    Objectives:

    Overview/Description

    Explore the different configuration options that are part of IPv4 addressing and explore some basic troubleshooting techniques.



    Target

    Prerequisites: none

    CCENT: IPv6 Addressing

    Course Number:
    it_ccenttv_10_enus
    Objectives:

    Overview/Description

    IPv6 overcomes the limitations of IPv4 by providing more than enough globally unique IP addresses to accommodate every device in the world. Explore IPv6 features, address types, and allocation.



    Target

    Prerequisites: none

    CCENT: IPv6 Configuration

    Course Number:
    it_ccenttv_13_enus
    Objectives:

    Overview/Description

    Explore IPv6 address configuration including enabling unicast routing, manually assigning IPv6 addresses, and ways to verify the interface.



    Target

    Prerequisites: none

    CCENT: NAT Configuration

    Course Number:
    it_ccenttv_32_enus
    Lesson Objectives

    CCENT: NAT Configuration

    • describe the different types of NAT and configure static NAT
    • None
    • configure and use PAT, or NAT overload, using an access-list

    Overview/Description

    Network address translation is a process for allowing client systems to access the internet without their own dedicated routable IP. Discover how to configure and use NAT.



    Target

    Prerequisites: none

    CCENT: Network Cabling

    Course Number:
    it_ccenttv_05_enus
    Objectives:

    Overview/Description

    Explore the different networking cables, such as fiber and copper cables, technicians may encounter while working.



    Target

    Prerequisites: none

    CCENT: Network Components, Topologies, and Architecture

    Course Number:
    it_ccenttv_04_enus
    Objectives:

    Overview/Description

    Discover the key network components that you'll find within a network, the common design strategies for topologies, and the key network architecture basics required to configure a functional Enterprise internetwork.



    Target

    Prerequisites: none

    CCENT: NTP Configuration

    Course Number:
    it_ccenttv_29_enus
    Objectives:

    Overview/Description

    Synchronizing time between systems is important for meeting many legal obligations. The Network Time Protocol was designed to do this. Discover how to configure an NTP server and configure clients to use the service.



    Target

    Prerequisites: none

    CCENT: OSI Model

    Course Number:
    it_ccenttv_02_enus
    Objectives:

    Overview/Description

    The Open System Interconnection (OSI) model divides network communication into seven layers. Explore the seven layers of the OSI model.



    Target

    Prerequisites: none

    CCENT: Overview of Cisco Devices

    Course Number:
    it_ccenttv_15_enus
    Objectives:

    Overview/Description

    Explore the physical components of Cisco devices - the internal integrated parts provided in some devices, versus the interchangeable options included for others, allowing the addition of further functionality.



    Target

    Prerequisites: none

    CCENT: Overview of Networking

    Course Number:
    it_ccenttv_01_enus
    Objectives:

    Overview/Description

    Networks are the basic interconnections for all computing devices. Explore network fundamentals.

     



    Target

    Prerequisites: none

    CCENT: Port Security

    Course Number:
    it_ccenttv_22_enus
    Lesson Objectives

    CCENT: Port Security

    • describe port-security violation modes and the need for configuring "switchport port-security"
    • configure port security and demonstrate recovery from a violation

    Overview/Description

    Explore port-security concepts, such as the different violation modes, the need for "switchport port-security", and how to configure a recovery from a violation.



    Target

    Prerequisites: none

    CCENT: RIPv2 Configuration

    Course Number:
    it_ccenttv_26_enus
    Lesson Objectives

    CCENT: RIPv2 Configuration

    • configure dynamic routing protocols using RIP v2 for IPv4 by building a routing table
    • configure RIPv2 passive interfaces, loops, and changes to the network topography
    • tuning RIPV2 timing parameters and options

    Overview/Description

    Although static routing can work for a smaller network, ultimately, dynamic routing is the way to handle routing. Explore dynamic routing using the RIPv2 protocol over IPv4.



    Target

    Prerequisites: none

    CCENT: Static Routing

    Course Number:
    it_ccenttv_25_enus
    Objectives:

    Overview/Description

    Routing allows data to be transmitted across networks from source to destination. Optimal routes can be determined by using dynamic routing protocols or by static configuration. Explore the implementation of static routes.



    Target

    Prerequisites: none

    CCENT: Subnetting Part 1

    Course Number:
    it_ccenttv_08_enus
    Objectives:

    Overview/Description

    Subnetting has several benefits, including achieving more efficient use of address space, increasing security through segmentation, and decreasing the size of collision and broadcast domains. Explore how to easily subnet networks.



    Target

    Prerequisites: none

    CCENT: Subnetting Part 2

    Course Number:
    it_ccenttv_09_enus
    Objectives:

    Overview/Description

    Subnetting has several benefits, including achieving more efficient use of address space, increasing security through segmentation, and decreasing the size of collision and broadcast domains. Explore how to easily subnet networks.



    Target

    Prerequisites: none

    CCENT: Subnetting Practice

    Course Number:
    it_ccenttv_35_enus
    Lesson Objectives

    CCENT: Subnetting Practice

    • recognize and work with subnetting problems
    • apply subnetting to example problems

    Overview/Description

    Work through the logic of tackling exam questions about subnetting.



    Target

    Prerequisites: none

    CCENT: Switching Functions

    Course Number:
    it_ccenttv_16_enus
    Objectives:

    Overview/Description

    Discover fundamental concepts like broadcast and collision domains, the difference between hubs and switches, and how MAC address tables are populated as data moves through the switch device.



    Target

    Prerequisites: none

    CCENT: TCP/IP Model

    Course Number:
    it_ccenttv_03_enus
    Objectives:

    Overview/Description

    Discover the TCP/IP networking model, which is used in the majority of LAN networks and on the Internet, and explore the two foundational transport layer protocols - TCP and UDP.



    Target

    Prerequisites: none

    CCENT: Troubleshooting Interfaces and Cables

    Course Number:
    it_ccenttv_18_enus
    Objectives:

    Overview/Description

    Cabling-related settings need to be configured properly in order to ensure device connectivity and interface stability. Explore the configuration and troubleshooting of speed, duplex, MDIX, and auto interface settings.



    Target

    Prerequisites: none

    CCENT: Troubleshooting Methodologies

    Course Number:
    it_ccenttv_14_enus
    Objectives:

    Overview/Description

    Troubleshooting methodologies provide a variety of approaches. Explore how to determine which techniques are best suited for your configuration scenario.



    Target

    Prerequisites: none

    CCENT: VLAN Configuration

    Course Number:
    it_ccenttv_19_enus
    Objectives:

    Overview/Description

    VLANs are logically separated broadcast domains created through switching technology that provide a means of creating network security zones. Explore network design and how VLANs are used to enhance network operations.



    Target

    Prerequisites: none

    ICND2 3.0: Configuring ACLs

    Course Number:
    it_ccnarstv_22_enus
    Objectives:

    Overview/Description

    An access control list (ACL) is a programmed statement used to permit or deny network traffic based on specified criteria. Explore ACL types, how they operate, and their configuration.



    Target

    Prerequisites: none

    ICND2 3.0: Configuring and Verifying EIGRP

    Course Number:
    it_ccnarstv_16_enus
    Lesson Objectives

    ICND2 3.0: Configuring and Verifying EIGRP

    • configure 3 routers to use EIGRP to adverstise routes
    • identify the variance command, auto-summmary and manipulate the bandwidth on interfaces to change what gets into the routing table for EIGRP
    • configure, verify, and troubleshoot EIGRP for IPv6

    Overview/Description

    Building scalable routed networks requires dynamic routing protocols like EIGRP. Learn how to configure and modify EIGRP, as well as how to verify your configurations.



    Target

    Prerequisites: none

    ICND2 3.0: Configuring and Verifying OSPFv3

    Course Number:
    it_ccnarstv_14_enus
    Objectives:

    Overview/Description

    OSPFv3 is a link-state routing protocol that expands on the functionality of OSPFv2, including support for IPv6. Explore the OSPFv3 routing protocol, including how to configure it and verify the configuration.



    Target

    Prerequisites: none

    ICND2 3.0: Configuring EtherChannel

    Course Number:
    it_ccnarstv_07_enus
    Objectives:

    Overview/Description

    Discover the benefits of EtherChannel and learn how to configure it.



    Target

    Prerequisites: none

    ICND2 3.0: Configuring Multiarea OSPFv2

    Course Number:
    it_ccnarstv_13_enus
    Objectives:

    Overview/Description

    Discover how to configure multiarea OSPFv2 and explore the differences between single-area and multiarea OSPFv2.



    Target

    Prerequisites: none

    ICND2 3.0: Configuring OSPFv2

    Course Number:
    it_ccnarstv_12_enus
    Objectives:

    Overview/Description

    OSPF is a highly flexible and versatile routing protocol. Examine the configuration and verification of an OSPFv2 deployment.



    Target

    Prerequisites: none

    ICND2 3.0: Configuring Trunking

    Course Number:
    it_ccnarstv_03_enus
    Objectives:

    Overview/Description

    Explore the concept of trunking and the tasks required to configure and verify them.



    Target

    Prerequisites: none

    ICND2 3.0: Device Monitoring, Management, and Programmability

    Course Number:
    it_ccnarstv_24_enus
    Lesson Objectives

    ICND2 3.0: Device Monitoring, Management, and Programmability

    • describe the use of AAA for device management and the differences between TACACS+ and RADIUS
    • describe how networking devices function with the control and data planes

    Overview/Description

    Networks are continually evolving, which is something that you need to embrace. This will help you implement the most secure, scalable, highly-available, and cost efficient networks. Explore device management tools.



    Target

    Prerequisites: none

    ICND2 3.0: Implementing EIGRP

    Course Number:
    it_ccnarstv_15_enus
    Objectives:

    Overview/Description

    Enhanced Interior Gateway Routing Protocol (EIGRP) is an advanced distance-vector routing protocol developed by Cisco. Learn about its features, feasible and reported distances, and how it calculates metrics.



    Target

    Prerequisites: none

    ICND2 3.0: Implementing VLANs

    Course Number:
    it_ccnarstv_01_enus
    Objectives:

    Overview/Description

    VLANs provide several benefits, including providing flexible design that's not defined by physical location and the ability to segment broadcast domains to reduce overhead and increase security. Examine how to configure VLANs.



    Target

    Prerequisites: none

    ICND2 3.0: Infrastructure Services

    Course Number:
    it_ccnarstv_20_enus
    Lesson Objectives

    ICND2 3.0: Infrastructure Services

    • describe HSRP and why it is used
    • describe how to access cloud resources and the different types of virtual services available

    Overview/Description

    Examine how HSRP and cloud computing can greatly enhance networks.



    Target

    Prerequisites: none

    ICND2 3.0: InterVLAN Routing

    Course Number:
    it_ccnarstv_09_enus
    Objectives:

    Overview/Description

    Discover the need for InterVLAN routing in modern day network deployments and explore the concepts and configuration of InterVLAN routing.



    Target

    Prerequisites: none

    ICND2 3.0: OSPFv2 Operations

    Course Number:
    it_ccnarstv_11_enus
    Objectives:

    Overview/Description

    Explore the characteristics and behaviors of OSPFv2 and how it can be used to build large scale routing domains.



    Target

    Prerequisites: none

    ICND2 3.0: PortFast and BPDU guard

    Course Number:
    it_ccnarstv_06_enus
    Objectives:

    Overview/Description

    PortFast and Bridge Protocol Data Unit (BPDU) guard are Spanning Tree Protocol (STP) enhancements that improves network reliability, manageability, and security. Discover how to configure PortFast and BPDU guard.



    Target

    Prerequisites: none

    ICND2 3.0: QoS Overview

    Course Number:
    it_ccnarstv_21_enus
    Lesson Objectives

    ICND2 3.0: QoS Overview

  • describe basic QoS concepts

  • Overview/Description

    Explore the need for QoS, and the various features, tools, and mechanisms that it offers.



    Target

    Prerequisites: none

    ICND2 3.0: Routing Protocols

    Course Number:
    it_ccnarstv_10_enus
    Objectives:

    Overview/Description

    Explore the characteristics and behaviors of different interior gateway protocols so you will be able to identify which one aligns best to your needs.



    Target

    Prerequisites: none

    ICND2 3.0: SNMP Monitoring

    Course Number:
    it_ccnarstv_23_enus
    Objectives:

    Overview/Description

    Explore SNMP, a standard protocol for managing and monitoring network devices.



    Target

    Prerequisites: none

    ICND2 3.0: Spanning Tree Configuration and Verification

    Course Number:
    it_ccnarstv_05_enus
    Objectives:

    Overview/Description

    Spanning Tree Protocol (STP) identifies and terminates redundant links to provide a loop-free network. Examine STP configuration.



    Target

    Prerequisites: none

    ICND2 3.0: Spanning Tree Overview

    Course Number:
    it_ccnarstv_04_enus
    Objectives:

    Overview/Description

    Spanning Tree Protocol (STP) identifies and terminates redundant links to provide a loop-free network. Explore STP operations.



    Target

    Prerequisites: none

    ICND2 3.0: Troubleshooting Connectivity

    Course Number:
    it_ccnarstv_25_enus
    Lesson Objectives

    ICND2 3.0: Troubleshooting Connectivity

    • describe Echo-based IP SLAs and why they are used
    • describe the simple configuration of local SPAN
    • describe the basic tools used to troubleshoot end-to-end connectivity

    Overview/Description

    As a network administrator, it's vital to be able to troubleshoot network connectivity issues. Learn how to troubleshoot with SPAN, IP SLA, and other tools.



    Target

    Prerequisites: none

    ICND2 3.0: Trunking Overview

    Course Number:
    it_ccnarstv_02_enus
    Objectives:

    Overview/Description

    Trunk links provide VLAN identification for frames traveling between switches. Explore the concept of trunking.



    Target

    Prerequisites: none

    ICND2 3.0: WAN Topologies and Connectivity

    Course Number:
    it_ccnarstv_19_enus
    Objectives:

    Overview/Description

    Today's networks span across the globe. To connect different geographical locations, you need to implement a wide area network. Build your foundational knowledge of WANs by learning about topologies, connectivity options, VPNs, and devices.



    Target

    Prerequisites: none

    ICND2 3.0: Wide Area Networks Using GRE and eBGP

    Course Number:
    it_ccnarstv_18_enus
    Lesson Objectives

    ICND2 3.0: Wide Area Networks Using GRE and eBGP

    • configure the GRE tunnel and verify that it works
    • describe the basics of IGP vs EGP for configuring single-homed eBGP

    Overview/Description

    A WAN is a network that spans large geographical areas and interconnects smaller networks, such as LANs. Increase your knowledge of connecting global networks by learning about GRE tunnels, inter-domain routing, and eBGP.



    Target

    Prerequisites: none

    ICND2 3.0: Wide Area Networks Using PPP

    Course Number:
    it_ccnarstv_17_enus
    Lesson Objectives

    ICND2 3.0: Wide Area Networks Using PPP

    • describe the use of PPP over serial links
    • configure load balancing by using multilink PPP configuration
    • describe the basic concept of using PPPoE and demonstrate both the server-side and client-side configurations

    Overview/Description

    WANs connect global networks and choosing the correct type depends on your needs. Learn about PPP, MLP, and PPPoE so you have the knowledge you need to research, deploy, manage, and maintain WANs.



    Target

    Prerequisites: none

    ICND2 3.0: Switch Aggregation and Threat Mitigation

    Course Number:
    it_ccnarstv_08_enus
    Objectives:

    Overview/Description

    Being able to meet your network's demands is essential in managing secure and highly available networks. Explore switch aggregation and threat mitigation.



    Target

    Prerequisites: none

    Mentoring 200-125 Interconnecting Cisco Networking Devices (CCNA)

    Lesson Objectives

    Mentoring 200-125 Interconnecting Cisco Networking Devices (CCNA)

    • Network Fundamentals
    • LAN Switching Technologies
    • Routing Technologies
    • WAN Technologies
    • Infrastructure Services
    • Infrastructure Security
    • Infrastructure Management

    Overview/Description
    Skillsoft Mentors are available to help students with their studies for exam 200-125 Interconnecting Cisco Networking Devices (CCNA). You can reach them by entering a Mentored Chat Room or by using the Email My Mentor service.

    Target Audience
    Individuals who are studying the associated Skillsoft content in preparation for, or to become familiar with, the skills and competencies being measured by the actual certification exam.

    TestPrep 200-125 CCNA Routing and Switching

    Course Number:
    cc_ccna_a03_tp_enus
    Lesson Objectives

    TestPrep 200-125 CCNA Routing and Switching

    • >

    Overview/Description
    To test your knowledge on the skills and competencies being measured by the vendor certification exam. TestPrep can be taken in either Study or Certification mode. Study mode is designed to maximize learning by not only testing your knowledge of the material, but also by providing additional information on the topics presented. Certification mode is designed to test your knowledge of the material within a structured testing environment, providing valuable feedback at the end of the test.

    Target Audience
    Individuals seeking practice in a structured testing environment, covering the skills and competencies being measured by the vendor certification exam.

    Prerequisites: none

    Close Chat Live